PERC Technology
  • PERC cell

    The PERC cell has a passivated rear side and a laser grooving process, which significantly improves the cell efficiency.

  • Bifacial PERC

    For a bifacial PERC cell, the Al back surface field is replaced by Al grid, hence render the majority of rear side transparent and attain a bifaciality of 75%-80%.

  • High Energy Yield

    Outstanding low irradiance performance, low power-temperature coefficient, low operating temperature, all these technologies lead to a high energy yield.

  • Warranty

    Based on the advanced mono wafer and anti-LID technology, LONGi offers a first-year power warranty of 98% for PV modules.

  • Cell Efficiency in 

    Mass Production

  • 1st Year Degradation, 

    Anti-LID

  • Outstanding Low

    Irradiance

    Performance

  • low Power

    Temperature

    Coefficient

Bifacial Power Generation

The energy yield of bifacial module can be influenced by albedo, height of module, GCR and DHI etc. Installation height of bifacial module is recommended to be higher than 1m. Shading from bracket and junction box should be avoided. At present, the power generation of bifacial module on fixed brackets and single axis tracker can be simulated with PVsyst. Investors can determine the DC/AC ratio of bifacial module system to minimize the LCOE.

  • Nearly 10% Water
  • 15-25% Grass
  • 20-30% Soil
  • 25-40% Concrete / Sand
  • 75-90% Reflective film / snowfield
  • Albedo

    It has considerable gains on grass land, dry sand, especially in snowfield
  • Module Height

    High module height will reduce the shading impact on rear side. A minimum of 1m is recommended
  • GCR

    A low GCR will increase radiance on the rear side
  • DHI

    Diffuse light can be absorbed by the rear side of the module. the higher proportion of Diffuse light, the higher is the bifacial gain
Half-cut Technology

Half-cut cell technology is to cut the cell into two seperate parts by mature infrared laser, hence halve the working current. The thermal loss on the ribbon will be remarkably reduced and the module’s power increases by 2%. The reliability of module is also enhanced.

The combination of half-cut cell technology and bifacial module can amplify the gain over the effect of current-reduction.

  • ALower Hot Spot Temperature

    In field applications, small area shadings can cause the temperature of those parts extremely high. This phenomena is called hot spot. The long duration of hot spot could bring irreversible degradation of modules.

    Because the string current of half-cell modules is half of full-cell modules, the hot spot temperature can be obviously reduced. LONGi’s experiments show that this reduction could be 10-20℃, which increases the module reliability.

  • BLower Operating Temperature

    Half-cut cells have half of the working current, thereby the thermal loss is remarkably reduced. Operating temperature correspondingly decreases, and the reliability of module is improved as well as power gain.

  • CLower Shading Loss

    Because of the unique parallel connection design, half-cell modules still have 50% power output under the circumstance of array shading in sunrise or sunset when portrait installation.

    In addition, half-cut technology can improve the output of bifacial module under non-uniform incident illumination on the backside.

  • DHigher Energy Yield Under High Irradiation Condition

    Under high irradiation conditions, half-cell module, especially bifacial half-cell module, will have a higher energy yield compared with conventional module. Bifacial half-cell module will help to achieve the lowest LCOE in regions which is rich in sun radiation resources.

register

Register Your Account

*Username
This username isn't available
*Passcode
*Confirm Passcode
*Email
*Country
VERIFY YOUR EMIAL

 

An email with a link has been sent to your email. Go and check it.

 

Forget password

Please enter your username and email address

email or username
Email address or user name input error!